The A30XV Rate of Rise & Static Heat Detector unit has low profile modern looks with high performance that is ideal for even the most prestigious of buildings.

A30XH Key Features: -

• Designed and manufactured to the highest standards in an ISO9000 quality controlled environment, the A30XV is the ideal solution to fire alarm warning.

• The A30XV is the ideal companion for a Fire Extinguishing System, or wider conventional type fire alarm system.

• There are two sensor elements (heat function, head speed function) composed of thermistors which act independently on a double operation amplifier that compares values with a referenced value.

• The A30XV is versatile with interchangeable detector head and base. It also has the ability to connect to a remote indicator.

• Designed with Architectural requirements in mind, the A30XV has been designed with good aesthetic looks that makes it the ideal choice for important and prestigious building applications.

• Inbuilt power voltage stabilisation ensures constant and reliable sensitivity of the detector is maintained, in spite of variations in power voltage.

• Ideal solution where fumes and dust are present, such as workshop areas, vehicle loading bays, storage areas and other places where smoke detectors are inappropriate.

The A30XH Thermally Enhanced Optical Smoke Detector unit has low profile modern looks with high performance that is ideal for even the most prestigious of buildings.A microprocessor intelligent detector that also provides visual warning when maintenance is required. Universal mounting base as standard across the entire A30 range of detectors. 

The intelligent A30XH conventional detector can easily signal that maintenance is required via an intermittent flash of 4 second intervals via its LEDs. This allows for easy maintenance procedures. 

The A30XH is the ideal companion for a Pyroshield Fire Extinguishing System, or wider conventional type fire alarm system.

A30XH Key Features: - 

• Compliant with and approved to EN54-7 by AENOR.

• Modern style, low profile design.

• Easy connections.

• Twin LEDs for all round and easier visual inspection.

• Low current consumption.

• Generates optical warning when maintenance is required. A visual LED flash that is intermittent every 4 seconds.

• Available in 24Vdc.

• Includes a static heat element set to signal an alarm at a temperature of 60oC.

• Simple installation with clip together unit and universal mounting facilities.

• Constructed from heat resistant ABS Plastic.

• Plug & Play Installation Concept - just terminate wires - no time wasted.
• Anti-tamper facility as standard.
• Test facility and key.
• Enhanced Aesthetics.
• All models totally compliant to En54-11.
• Fire Breakglass Models compliant with all EN compliant control panels.
• All callpoint models supplied with LED Indicator as standard.
• Manual Emergency Door Release Models come with internally fitted suppression diode as standard.
• Fire and Extinguishant Release Models come with 680ohm series resistor.

• Flexibility, with two mounting base options. The standard base model provides low profile features for recessed and ‘back entry’ wiring. For applications requiring surface mount wiring and or a higher level of protection, the deep base IP65 is available.
• Screw fixing into the base together with a rubber seal gives excellent resistance to moisture and dust ingress.
• Separate tone, flash rate and volume configuration.
• Extra long life solid state flash array puts an end to expensive short term xenon flash tube failure.
• Programmable flash rates with unique double flash “attention grabber” technology.
• Micro-current technology provides super low current draw from the strobe/sounder combo – no more expensive UPS devices.
• Xx tones and xx flash patterns fully user programmable with 3rd wire priority tone override.

• Flexibility, with two mounting base options. The standard base model provides low profile features for recessed and 'back entry' wiring. For applications requiring surface mount wiring and or a higher level of protection, the deep base IP65 is available.
• Screw fixing into the base together with a rubber seal gives excellent resistance to moisture and dust ingress.
• A four position volume control allows precise volume matching between sounders. With a wide range of operating frequencies all of the fully synchronised tones have been selected to comply with the latest sound patterns and frequencies used throughout the world.
• A suitable standard compliant tone is easily selectable via the DIP switch.
• The use of a third wire enables a second stage alarm to be switched in to override the selected tone.
• A protective moulding allows access to the terminal block and DIP switch and eliminates the chance of mechanical damage to the electronics during installation and throughout the product's life.

SuperBell Key Features

• Modern Styling – low profile design
• Two In – Two Out wiring to ease installation
• Low current consumption
• Superior reliability due to highly efficient motorised movement
• Option of customized fronts with company logo
• Available in 24 Vdc
• Simple clip together installation
• Universal mounting facilities

Control Panel Key Features

• Fully enclosed panel with lockable front door

• Dual Microprocessor

• Robust Slimline cabinet

• Lightning protection

• RS485 datacom port

• System test function with auto-isolate

• Outputs for gas control system

• Gas fault indication